Discussion:
Sansa e200 "no partition found"
Thomas Herzig
12/07/2009 11:33:33 UTC
link permanente
I wanted to reset my Sansa E200. so i format. but it doesn't fully work. There was a mistake. and now when I want to start sansa it also gives an error that says:
"Rockbox-Bootloader
Version: 5.0
Sandisk Sansa e200
No partition found"
Can someone help me please?
The original firmware cannot be started and pressing the menu button for 15 seconds does not help either.
Thanks
Anton Stein
12/07/2009 12:10:05 UTC
link permanente
Posted by Thomas Herzig
I wanted to reset my Sansa E200. so i format. but not
work fully. There was a mistake. and now when i want to start this
sansa, there is also an error that says: "Rockbox Bootloader
Version: 5.0
Sandisk Sansa e200
No partition found"
Can someone help me please?
The original firmware cannot be started and pressing it does not help either
Menu button 15 seconds.
how did you format
Did you delete the partition table and if so did you recreate it
after?
What kind of filesystem do you specify when rebuilding (I believe FAT32 is
the default type).
http://www.rockbox.org/twiki/bin/view/Main/SansaE200FirmwarePartition e
http://daniel.haxx.se/sansa/e200.html may provide some useful debugging information.
Antonio.
--
It is also possible to place the birds in a laboratory environment
inadvertently makes them relatively incompetent.
-Daniel C Dennett
Please respond to the list;
please don't CC me.
-------------------------------------------------- ------------------
Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
Thomas Herzig
12/07/2009 12:19:37 UTC
link permanente
Yes, I think it was the standard type. and I couldn't recreate it because
every time I start sansa or connect to the pc I get an error
----- Original message -----
Por: "Antony Stone" <***@rockbox.open.source.it>
An: "Rockbox" <***@cool.haxx.se>
Sent: Sunday, July 12, 2009 at 2:10 pm
Subject: Re: Sansa e200 "no partition found"
Posted by Antonio Stone
Posted by Thomas Herzig
I wanted to reset my Sansa E200. so i format. but not
work fully. There was a mistake. and now when i want to start this
sansa, there is also an error that says: "Rockbox Bootloader
Version: 5.0
Sandisk Sansa e200
No partition found"
Can someone help me please?
The original firmware cannot be started and pressing it does not help either
Menu button 15 seconds.
how did you format
Did you delete the partition table and if so did you recreate it
after?
What kind of filesystem do you specify when rebuilding (I believe FAT32 is
the default type).
http://www.rockbox.org/twiki/bin/view/Main/SansaE200FirmwarePartition e
http://daniel.haxx.se/sansa/e200.html may provide some useful debugging information.
Antonio.
--
It is also possible to place the birds in a laboratory environment
inadvertently makes them relatively incompetent.
-Daniel C Dennett
Please respond to the list;
please don't CC me.
-------------------------------------------------- ------------------
Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
-------------------------------------------------- ------------------
Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
Thomas Herzig
2009-07-12 12:40:19 UTC
link permanente
Thank you all. my problem is solved. I did it in recovery mode which works on the fifth try.
now everything has been reset and i can reinstall rockbox.
----- Original message -----
Eng: Thomas Herzig
An: ***@cool.haxx.se
Sent: Sunday, July 12, 2009 at 1:33 pm
Re: Sansa e200 "no partition found"
I wanted to reset my Sansa E200. so i format. but it doesn't fully work. There was a mistake. and now when I want to start sansa it also gives an error that says:
"Rockbox-Bootloader
Version: 5.0
Sandisk Sansa e200
No partition found"
Can someone help me please?
The original firmware cannot be started and pressing the menu button for 15 seconds does not help either.
Thanks
Thomas Herzig
12.07.2009 15:41:43 UTC
link permanente
now there is another problem. I booted into recovery mode and that's it
BL_SD_boardSupportSD.rom
SKU_E-PP5022.mi4
in sansa. Now I can start it but there is no music on it, it gives a "failed to update database" error and my pc doesn't show it. it doesn't matter which usb mode it's in.
----- Original message -----
Eng: Thomas Herzig
R: Rockbox
Sent: Sunday, July 12, 2009 at 2:40 pm
Subject: Re: Sansa e200 "no partition found"
Thank you all. my problem is solved. I did it in recovery mode which works on the fifth try.
now everything has been reset and i can reinstall rockbox.
----- Original message -----
Eng: Thomas Herzig
An: ***@cool.haxx.se
Sent: Sunday, July 12, 2009 at 1:33 pm
Re: Sansa e200 "no partition found"
I wanted to reset my Sansa E200. so i format. but it doesn't fully work. There was a mistake. and now when I want to start sansa it also gives an error that says:
"Rockbox-Bootloader
Version: 5.0
Sandisk Sansa e200
No partition found"
Can someone help me please?
The original firmware cannot be started and pressing the menu button for 15 seconds does not help either.
Thanks
-------------------------------------------------- --------------------------
-------------------------------------------------- ------------------
Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
Christoph Chatain
12/07/2009 17:54:35 UTC
link permanente
Posted by Thomas Herzig
I wanted to reset my Sansa E200. that's why I
format it. but it doesn't fully work. there was one
Error. and now if i want to start sansa there is a
"Rockbox-Bootloader
Version: 5.0
Sandisk Sansa e200
No partition found"
The original firmware cannot start and
it doesn't help to press the menu button for 15 seconds.
now there is another problem. I started recovery mode
feito BL_SD_boardSupportSD.rom
SKU_E-PP5022.mi4
in sansa. Now I can start it but there is no music playing
this, there is a "database update failed" error and my pc does not do this
Show. it doesn't matter which usb mode it's in.
I recently purchased a Sansa e280 on eBay and for various reasons
wanted to launch it in its preselected state, so I downloaded a utility
from the internet called Sansa Updater. This repairs and restores the Sansa e280
the original Sansa file system. Once I'm in, it's prestine, straight up
from Sansa State I installed Rockbox. You might want to try this. He can
solve your problems.
I found this utility on the Internet without much trouble. unfortunately,
I no longer have the URL or the Sansa Updater utility itself
there is a link to the web, but as I said, I found it without much
Problem.
Also, you're probably not aware of it, but you're violating the list.
Tag by top post. To follow list etiquette, you must
Delete the message you are replying to and put your comments below the message
you are referring to The link to the tag list appears at the end of the
every message.
--
Christoph
***@googlemail.com
-------------------------------------------------- ------------------
Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
I admit Timmaj
2009-07-12 21:28:21 UTC
link permanente
Subject: RE: Sansa e200 "no partition found"
Date: Sun, July 12, 2009 12:54:35 -0500
Posted by Thomas Herzig
I wanted to reset my Sansa E200. that's why I
format it. but it doesn't fully work. there was one
Error. and now if i want to start sansa there is a
"Rockbox-Bootloader
Version: 5.0
Sandisk Sansa e200
No partition found"
The original firmware cannot start and
it doesn't help to press the menu button for 15 seconds.
now there is another problem. I started recovery mode
feito BL_SD_boardSupportSD.rom
SKU_E-PP5022.mi4
in sansa. Now I can start it but there is no music playing
this, there is a "database update failed" error and my pc does not do this
Show. it doesn't matter which usb mode it's in.
I recently purchased a Sansa e280 on eBay and for various reasons
wanted to launch it in its preselected state, so I downloaded a utility
from the internet called Sansa Updater. This repairs and restores the Sansa e280
the original Sansa file system. Once I'm in, it's prestine, straight up
from Sansa State I installed Rockbox. You might want to try this. He can
solve your problems.
I found this utility on the Internet without much trouble. unfortunately,
I no longer have the URL or the Sansa Updater utility itself
there is a link to the web, but as I said, I found it without much
Problem.
Also, you're probably not aware of it, but you're violating the list.
Tag by top post. To follow list etiquette, you must
Delete the message you are replying to and put your comments below the message
you are referring to The link to the tag list appears at the end of the
every message.
--
Christoph
-------------------------------------------------- ------------------
Unsubscribe: http://cool.haxx.se/cgi-bin/mailman/listinfo/rockbox
FAQ: http://www.rockbox.org/twiki/bin/view/Main/GeneralFAQ
Etiquette: http://www.rockbox.org/mail/etiquette.html
A Google search brings this up. I hope it helps:
http://www.sandisk.com/Retail/Default.aspx?CatID=1376
_________________________________________________________________
Show them the way! Add maps and directions to your party invitations.
http://www.microsoft.com/windows/windowslive/products/events.aspx
keep readingmedicine:
Search results for'Sansa e200 "no partition found"'(Questions and answers)
6 answers
33 views
Permanent link for this page
Disable advanced analysis
Navigation Topic
Thomas Herzig2009-07-12 11:33:33 UTC